Lancaster Water Treatment Parts Filters Replacement Cartridges - set of 4 - 99% reduction rate of bacteria, pesticides, herbicides, and heavy metals from tap water. it include 3 filters and a membrane that must be replaced periodically, The different filters represent the different stages that the water goes through while being purified, Generally - Pre-Filters and post-Filters in aquasky RO systems can last around 8 To 12 months between changes.
RO membranes can last as long as 2 years
Stage 1-
Sediment /carbon filter is the first filter installed in Lancaster Water Treatment - The main function of a sediment / carbon filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles. Removal of such particles allows for a better performance of all the following filters.
- Lifetime: please replace every year, depending on the water quality.
This filter is wrapped and sealed and meets NSF Standards and Regulations - Compatible With Lancaster Water Treatment filters
Stage 2-
Carbon GAC Filter are well-known for their highly efficient reduction of chlorine taste and odor in all Lancaster Water Treatment
Taste and odors of many organic chemicals and volatile organic compounds.
All GAC filters are made with organic high quality coconut shell carbon.
- Lifetime: please replace every year, depending on the water quality.
This filter is wrapped and sealed and meets NSF Standards and Regulations. Filter compatible with all the Lancaster Water Treatment units systems under sink
Stage 3-
50 GPD NSF certified thin film TFC Membrane is the main component of Lancaster Water Treatment reverse osmosis unit.
- Made with 100% Organic fine thin film flat sheet
- 96% reduction rate of bacteria, pesticides, herbicides, and heavy metals from tap water.
- Lancaster Water Treatment membrane has The micron rating of a thin film less than 1/10000th of a Micron which is 620,000 times finer than A human hair, 2,500 times smaller than bacteria and 20 Times smaller than any virus.
Product Features:
- 50 Gallons Per Day (15.8 -19.6 Liters per Hour) Capacity
- 96% stabilized salt rejection (minimum rejection 93%)
- NSF/ANSI Standard 58 listed
Operating Conditions :
- Performance specifications based on 500 ppm tap water
Stage 4-
Inline carbon filter for Lancaster Water Treatment is known as polishing filters, because they would usually be the last stage of any standard reverse osmosis circuit.
Being made of high quality coconut shell carbon they stabilize the water tasting qualities and further remove any traces of bad tastes and odors.
- Lifetime: please replace ones in 1- 2 years.
